High reliability is a key performance of electrical control equipment.Due to the use of modern large-scale integrated circuit technology and strict production technology,the internal circuit adopts advanced anti-interference technology,which has high reliability.Using PLC to form the control system,compared with the relay contactor system of the same scale,the electrical wiring and switch contacts have been reduced to hundreds or even thousands,and the failure has been greatly reduced.In addition,the PLC has the function of hardware fault self-detection,which can send out alarm information in time when a fault occurs.In the application software,the user can also program the fault self-diagnosis program of the peripheral device,so that the circuit and equipment other than the PLC in the system can also obtain the fault self-diagnosis protection.In this way,the entire system will be extremely reliable.
高可靠性是电气控制设备的关键性能。PLC由于采用现代大规模集成电路技术,采用严格的生产工艺制造,内部电路采取了先进的抗干扰技术,具有很高的可靠性。使用PLC构成控制系统,和同等规模的继电接触器系统相比,电气接线及开关接点已减少到数百甚至数千分之一,故障也就大大降低。此外,PLC带有硬件故障自我检测功能,出现故障时可及时发出警报信息。在应用软件中,应用者还可以编入外围器件的故障自诊断程序,使系统中除PLC以外的电路及设备也获得故障自诊断保护。这样,整个系统将极高的可靠性。
GP Sorensen Super Core Spark plug wire set 64586 NIB
NORS 57 58 60 61 62 63 64 65 66 67 68 69 70 Pontiac Tem
NORS 71 72 73 74 Ford F100 F150 F250 F350 302 330 E100
GP Sorensen 24-5022 Wells C865 Toyota Ignition Coil nos
SORENSEN DCR-B INSTRUCTION MANUAL ORIGINAL
Sorensen PTM15-1.5D Power Supply
SORENSEN 40-75, 55-55, 60-65 & 80-37 Instruction Manual