Pay attention to the interference problem of DCS.In order to achieve smooth signal transmission between DCS,the ideal state is that the DCS participating in mutual transmission and mutual transmission share a”ground”,and the potential of the signal reference point between them should be zero,but this is impossible in the production site..Because the wiring resistance between each”ground”will produce a voltage drop,and the environment is different,the difference between the”grounds”will also introduce interference,which will affect the correct sampling of the DCS.Interference is also one of the first factors to be considered when checking and judging DCS faults.
要重视DCS的干扰问题。要使DCS之间实现信号顺利传送,理想状态就是参与互传互递的DCS共有一个“地”,且它们之间的信号参考点的电位应为零,但在生产现场是不可能做到的。因为,各个“地”之间的接线电阻会产生压降,再者所处环境不同,这“地”之间的差异也会引入干扰,将会影响DCS的正确采样。干扰问题也是检查、判断DCS故障时要首先考虑的因素之一。
WESTINGHOUSE GFN421N GENERAL DUTY SAFTEY SWITCH (30 AMP
SQUARE D 8030 H0M-221 OUTPUT MODULE GOOD TAKEOUT
SQUARE D 9070EO1D1 TRANSFORMER BRAND IN BOX
MITSUBISHI A1S61P MELSEC POWER SUPPLY (DC 5V , 5A) GOOD
WTC FIRING MODULE 454-0-0028-0 GOOD TAKEOUT
FANUC A06B-6078-K002 2YB FAN MODULE ()
MITSUBISHI AY60 MELSEC OUTPUT MODULE GOOD TAKEOUT
TELEMECANIQUE XS1 M12NA370 PROXIMITY SWITCH ()
MITSUBISHI MELSEC A1S61P POWER SUPPLY UNIT GOOD TAKEOUT