When it is found that an operation station is dead,the monitoring screen data is not refreshed,and the adjustment screen does not work,check whether the system alarm indicator on the upper right is normal,and check whether other operation stations work normally.If they are normal,only the operation station has problems.Notify the computer maintenance personnel to repair.If the data of other operating stations also remain unchanged,the system communication network is faulty,immediately notify the maintenance personnel to check the operation of the network equipment and repair it.
当发现某个操作站死机,监控画面数据不刷新,调节画面不起作用,查看右上方系统报警指示灯是否正常,并检查其他操作站是否工作正常,若正常,则仅该操作站有问题,通知微机维修人员修理。若其他操作站数据也不变,则为系统通讯网络出现故障,立即通知维修人员检查网络设备的运行情况,进行修复。
EATON/CUTLER HAMMER SVX010A12A1B1 AC DRIVE 10HP XLNT
CUTLER HAMMER DH363UWK SAFETY SWITCH XLNT
CUTLER HAMMER HVX007A14A1B1C4 AC DRIVE 10HP XLNT
Westinghouse/CutlerHammer HFD3125L 3 Poles 125 Amps
EATON/CUTLERHAMMER/HONEYWELL HVX010A12A1B1/SVX007A12A1B1 10HP DRIVE NNB
CUTLER HAMMER CB00080 NSFP CB00080